You are viewing an older version of the ATB. Please view the most current version.
You are viewing an older version of the ATB. Please view the most current version here.
Content displaying: Representative Technology

Commercial PV

Representative Technology

For the 2020 ATB, commercial PV systems are modeled for a 200-kWDC fixed-tilt (5°), roof-mounted system. Flat-plate PV can take advantage of direct and indirect insolation, so PV modules need not directly face and track incident radiation. This gives PV systems a broad geographical application, especially for commercial PV systems.

Distributed-scale PV is assumed to be configured as a fixed-tilt, roof-mounted system. Compared to utility-scale PV, this reduces both the potential capacity factor and amount of land (roof space) that is available for development. A recent study of rooftop PV technical potential (Gagnon et al. 2016) estimated that as much as 731 GW (926 TWh/yr) of potential exists for small buildings (< 5,000 m2 footprint) and 386 GW (506 TWh/yr) for medium (5,000–25,000 m2) and large buildings (> 25,000 m2).


The following references are specific to this page; for all references in this ATB, see References.

Gagnon, Pieter, Margolis, Robert, Melius, Jennifer, Phillips, Caleb, & Elmore, Ryan. (2016). Rooftop Solar Photovoltaic Technical Potential in the United States: A Detailed Assessment. (No. NREL/TP-6A20-65298). National Renewable Energy Laboratory.

Developed with funding from the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy.